ensemble®- elektroniikka
ensemble®
swiss made quality since 1986
ensemble® massimo fuoco™
Integroitu vahvistin
Integrated amplifier with tube input stage
(2 x ECC801S, NOS),
power stage with bipolar transistors 2 x 100/150 W 8/4 Ohm.
Isolation transformer. 6 LINE level inputs (of which 1 in Monitor mode). Balance control.
Dimensions W x H x D: 395 x 135 x 315 mm. Weight 15.8 kg
Solid aluminium remote control
Supplied with 1.5 m Luminoso™ power cord and remote control.
Tubesox™ (tube dampers) fitted.
Al-Zorbo™ equipment platform recommended (optional).
Integroitu vahvistin
Katso tekniset tiedot/specifications
| Power nominal | 100 W / 8 ohm 150 W / 4 ohm per channel |
| Input sensitivity | 0.36 V (150 W / 4 ohm) |
| Input impedance | 45 kohm |
| Signal-to-noise-ratio | 99 dB (full power 4 ohm to noise floor) |
| THD+N | 0.2 % (1 W / 4 ohm / 1 kHz) |
| Negative feedback | 20 dB |
| Input tubes | Selected, matched ECC 81 (12AT7) |
| Voltage selector | 100 V, 115 V, and 230 V (50/60 Hz) mains |
| Mains fuses | 2 x 3.15 A T / 250 V (slow-blow) 220-240 V mains 2 x 5 A T / 250 V (slow-blow) 100-120 V mains |
| Power supply fuses | 4 x 4 A T / 250 V (slow-blow) |
| Speaker output fuses | 2 x 6.3 A FF / 250 V (super-fast) |
| Speaker outputs | Ensemble SYNERGIA binding posts, accepting 6 mm bananas (100 ampere-rated) 4 mm bananas 8 mm spades 10mm²- AWG7 nude cable |
| Dimensions (wdh) | 395 x 315 x 135 mm (15.5″ x 12.4″ x 5.3″) (wdh) 550 x 430 x 350 mm (21.6″ x 17″ x 13.8″) boxed |
| Weight | 15.5 kg (34 lbs) net, 19 kg (42 lbs) shipping weight |
| Accessories | Remote control handset TUBESOX™ tube dampers FLEXO™ shielded power cord (1.5 m) optional ZORBO™ equipment platform |
| Warranty | 2 years on parts (tubes 6 months) with the exception of all cases of failure due to mishandling, unauthorized modification,or overvoltage. |
ensemble® massimo fonobrio™
Levysoitinetuvahvistin
Phono preamplifier (MM/MC) in dual mono design, fully discrete circuitry.
Direct (DC) coupled, class A output stage. (AC coupling option inside).
Extremely low noise floor. Very high resolution.
Separate MC and MM inputs. MC: two gain stages. Total gain max 74 dB
Adjustable impedance for MC (rear), adjustable output (inside).
Dimensions W x H x D: 395 x 135 x 315 mm. Weight 9 kg.
Luminoso™ power cord 1.5 m included.
Al-Zorbo™ equipment platform recommended (optional).
Levysoitinetuvahvistin
Katso tekniset tiedot/specifications
| Bandwidth | 10 Hz – 85 kHz (-3 dB points) |
| RIAA Accuracy | 20 Hz – 20 kHz ±1 dB |
| Line Level Output | Max. 9.5 VRMS Phase correct Tolerating low impedance loads of > 3 kohm Output impedance < 100 ohm |
| Maximum Input | MC 4 mV MM 60 mV (= 23.5 dB overload margin) |
| Sensitivity / Gain | MC 250 µV for 4 mV output : 24 dB gain setting MC 125 µV for 4 mV output : 30 dB gain setting MM 4 mV for 640 mV output : 44 dB gain Total maximum gain (MC : 30 dB) : 74 dB |
| Input impedance | MC switchable between 16 values (51.7 ohm – 1 kohm) |
| Input capacitance | MC in parallel with 2300 pF MC custom value insertable internally MM 47 kohms in parallel with 220 pF |
| Total | MC better than –68 dB, referenced to 0.775 VRMS, unweighted |
| Hum and Noise | MC better than –74 dB, A weighted |
| (20 Hz – 20 kHz) | MM better than –80 dB, referenced to 0.775 VRMS, unweighted |
| THD | < 0.03%, MC input, 24 dB gain setting, Referenced to 0.775 mVRMS |
| Mains voltage (switchable) | 100 V 50-60 Hz 115 V 50-60 Hz 230 V 50-60 Hz |
| Mains fuses | 2 x 0.1 A T / 250 V slow-blow for 100 – 230 VAC |
| Power Switch | 115 V neon light (Ba9s bayonet socket) |
| Dimensions (wdh) | 395 x 315 x 138 mm (15.5″x 12.4″x 5.4″) 550 x 430 x 350 mm (21.6″x 17″x 13.8″) boxed |
| Weight | 8.5 kg (18.5 lbs) net, 12 kg (26 lbs) shipping weight |
| Warranty | 2 years on parts with the exception of faults due to mishandling, unauthorized modification or overvoltage |
ensemble® massimo evivo™
Päätevahvistin
Power amplifier with tube input stage (2 x ECC801S, NOS), power stage with bipolar transistors 2 x 100/150 W 8/4 Ohm. Isolation transformer.
RCA / cinch inputs.
Dimensions W x H x D: 395x135x315 mm. Weight 15.6 kg.
Supplied with Luminoso™ power cord 1.5 m.
Tubesox™ (tube dampers) fitted.
Al-Zorbo™ equipment platform recommended (optional)
Päätevahvistin
Katso tekniset tiedot/specifications
| Power nominal | 100 W / 8 ohm 150 W / 4 ohm per channel |
| Input sensitivity | 1.1 V (150 W / 4 ohm) |
| Input impedance | 20 kohm |
| Signal-to-noise-ratio | 99 dB (full power 4 ohm to noise floor) |
| THD + N | 0.2 % (1 W / 4 ohm / 1 kHz) |
| Negative feedback | 20 dB |
| Input tubes | Selected, matched ECC 81 (12AT7) |
| Voltage selector | 100 V, 115 V, and 230 V (50/60 Hz) mains |
| Mains fuses | 2 x 3.15 A T / 250 V (slow-blow) 220-240 V mains 2 x 5 A T / 250 V (slow-blow) 100-120 V mains |
| Power supply fuses | 4 x 4 A T / 250 V (slow-blow) |
| Speaker output fuses | 2 x 6.3 A FF / 250 V (super-fast) |
| Speaker outputs | Ensemble SYNERGIA binding posts, accepting 6 mm bananas (100 ampere-rated) 4 mm bananas 8 mm spades 10mm² – AWG7 nude cable |
| Dimensions (wdh) | 395 x 315 x 135 mm (15.5″ x 12.4″ x 5.3″) 550 x 430 x 350 mm (21.6″ x 17″ x 13.8″) boxed |
| Weight | 15.5 kg (34 lbs) net, 19 kg (42 lbs) shipping weight |
| Accessories | TUBESOX™ tube dampers FLEXO™ shielded power cord (1.5 m) optional ZORBO™ equipment platform |
| Warranty | 2 years on parts (tubes 6 months) with the exception of all cases of failure due to mishandling, unauthorized modification, or overvoltage. |
ensemble® Massimo isolink duo™
Erotusmuuntaja
Galvanic isolation of sources (digital / analogue) by two independent isolation transformers.
1×175 VA max and 1x 250 VA max.*
Power factor correction.
*Check the maximum power required by your device.
Dimensions W x H x D: 395 x135 x 315 mm. Weight 18 kg.
2 Luminoso™ power cords 1.5 m included.
Al-Zorbo™ equipment platform recommended (optional).
Erotusmuuntaja
Katso tekniset tiedot/specifications
| Type of transformer | split-core, for IEC class II (= earth-free) operation (4000 V isolation between primary and secondary) |
| Input | voltage switchable between 115 V 50/60 Hz and 230 V 50/60 Hz |
| Outputs | 115 V / US (Nema 5-15) and 230 V / General European Type (SCHUKO) [Standard model] |
| Power rating¹⁾ | DUO model : 250 VA and 175 VA constant (UNO model : 250 VA constant) |
| Fuses | 250 VA transformer: 2 x 3.15 A T ; for 115 V operation 2 x 2 A T for 230 V 175 VA transformer: 2 x 2.5 A T ; for 115 V operation 2 x 1.6 A T for 230 V All fuses are 5 x 20 mm slow-blow, high-current (>35 A), 250 V type |
| AC ground | independent of transformer, with safety choke coil |
| ’Power on’ light | linked to 250 VA transformer 115 V LED light (BA9s bayonet socket) |
| Chassis | epoxy-lacquered steel mechanical decoupling of transformers |
| Dimensions (wdh) | 395 x 315 x 135 mm (15.5″ x 12.4″ x 5.3″) 550 x 430 x 350 mm (21.6″ x 17″ x 13.8″) boxed |
| Weight | DUO model: 18 kg (39.5 lbs), boxed: 21 kg (46 lbs) shipping weight (UNO model: 14 kg (30.8 lbs), boxed: 17 kg (37.5 lbs) shipping weight) |
| ¹⁾The actual power consumed by the equipment connected to the Isolink | |
| Warranty | 2 years on parts with the exception of faults due to mishandling, unauthorized modification or overvoltage |
What makes Ensemble different ?
Of course there are many very good reasons as shown further along.
First of all, beside having exceptional qualities, a true High End product for us is one that has a level of maturity that obviates the need for regular updates or Mark II, etc. versions.
This means long product life cycles, long-term pride of ownership.
Small wonder then that 15 or 20 year old Ensemble equipment is still in treasured use.
Ensemble equipment is a true asset.